Trailer buddy torsion axles aren't your average torsion axle. The advancement of these axles over "standard" torsion axles is significant. Trailer Buddy torsion axles come standard with removable trailing arms. This means that replacing the spindle can be accomplished without torching off the axle and causing potential frame damage. If you ever were to damage a spindle or blow out your hub bearings, you won't have to replace the entire axle, only the "end unit" or trailing arm. This arm attaches to the main axle beam by a tooth and groove or spline system. Because of this, the trailing arms can be adjusted for up to 6 degrees for incremental ride height adjustments. The main axle beam integrates into your trailer's frame for added structural integrity.
Other exclusive features for these axles:
The combination of inner and outer alignment bushings holds superior wheel camber and toe-in
The rubber elements provide independent wheel suspension resulting in a smoother ride
Rubber is self-dampening which minimizes the trailer hop often experienced with leaf springs
Elimination of metal to metal contact means a quieter ride and no maintenance of spring linkages
To Special order one or more of these axles tailored specifically to your trailer's specifications, visit this link or call us at (559)486-0410: https://goo.gl/forms/zY2gPKj5ZLkycUnt2
Note: Special order torsion axles take approximately 1-2 weeks for delivery. Galvanized axle can take up to 3 weeks.
UFP-Trailer Buddy Rubber Torsion Axles
Trailer Buddy Torsion Axles come standard on all current model VM Trailers.
UFP 3750 lb Trailing Arm w/DB-35 Disc Brakes and Vault HLS
Item#UFP-3750EUB
This
replacement trailing arm works with all Trailer Buddy-UFP 3750lb
capacity torsion axles. Mounts easily to desired position by splines
that allow for ride height adjustment. Complete assembly is ready to be
bolted on to existing torsion axle with mounting bolt (included).
Complete with DB-35 series Disc Brake Rotor and Caliper.
Be sure to specify Grease or Vault in the dropdown below!
Axle Spring Seat for Square or Rectangular Tube Axles, 2" Wide
Item#33513
Leaf spring seats can be welded on the top or bottom of 2" wide, square or rectangular tube axles.
$4.29
Front Weld-On Leaf Spring Hanger
Item#AU0117P
Front weld trailer leaf spring hanger for
1 3/4" wide springs.
$3.95
Center Weld-On Leaf Spring Hanger
Item#32484
Center weld-on trailer leaf spring hanger for 1 3/4" wide leaf springs.
Trailer
Buddy Disc Brake Hub-and-Rotor features a ventilated design to allow
heat to escape. Cast iron construction with a UFP exclusive Zinc Plated
Plus finish is ideal for marine applications. Standard and most common
UFP Rotor. Used with standard grease and the VAULT bearing lubrication
system.
Trailer
Buddy Disc Brake Hub-and-Rotor features a ventilated design to allow
heat to escape. Cast iron construction with a UFP exclusive Zinc Plated
Plus finish is ideal for marine applications.
NOTE: Fits 1 3/8" x 1 3/8" straight spindles.
$95.65
UFP Press Fit Wheel Stud 1/2"-20 x 1.75"
Item#32498 Press Fit Wheel Stud, GM (very common)
$1.95
UFP 3750 lb Trailing Arm w/ Vault 5-Lug Hub
Item#UFP-3750EU
This
replacement trailing arm works with all Trailer Buddy-UFP 3750lb
capacity torsion axles. Mounts easily to desired position by splines
that allow for ride height adjustment. Complete assembly is ready to be
bolted on to existing torsion axle with mounting bolt.
$122.99
UFP 3750lb Torsion Axle Trailing Arm
Item#UFP-3750TA
This replacement trailing arm works with all trailer buddy UFP 3750lb capacity torsion axles. Mounts easily to desired position by splines that allow for ride height adjustment. Complete assembly is ready to be bolted to existing torsion axle with mounting bolt and nylock (included).
$52.99
Rear Weld-On Leaf Spring Hanger w/Bushing
Item#33520
Rear
weld trailer leaf spring hanger for single axle trailer suspensions. 1
3/4" x 2". Diameter, 9/16" I.D. Hole. Nylon Bushing Included.
$5.95
Rear Weld-On Leaf Spring Hanger (For Slipper Springs)
Item#U33884
Rear weld on trailer leaf spring hanger for 1 3/4" wide slipper style flat end springs.
$3.99
UFP DB-42 Zinc Plated Hub/Rotor, 5 on 4.5"-3.7K, 10.25D
Item#41035
This rotor should be used as a direct replacement for trailer buddy axles equipped with the DB-42 Disc Brake System.
$79.95
UFP DB-42 5-Lug Rotor Assembly, Straight Spindle
Item#41035SS
UFP DB-42, 5-Lug on 4.5" Rotor for use with up to 4200lb. Axles.