V/M Custom Boat Trailers

Axles

3500 LB. SQUARE AND 3750 LB. & 5000 LB. RECTANGULAR TUBE TRAILER AXLES



 

 

 

 

 







2" x 2" and 2" x 3" Diameter x .250" wall trailer axles.
All axles include spindle nuts, cotter pins, and spring seats (seats can be welded or left loose),  4-Bolt axle brake flange attached for addition of disc or drum brakes.
Spindle size is 1 1/16" x 1 3/8" Tapered (3500# - 3750#)
Spindle size is 1 3/4" x 1 1/4" Tapered with grease seal lip ID of 2.125" (5000#)
Axles are custom built to customers specifications. Please double check all measurements taken before submitting your order. 
Enter Hub Face and Drop measurement then add item to your cart.

If you need help, please contact our sales staff and they will help you.
UFP-Trailer Buddy Rubber Torsion Axles
Currenly, torsion axles are available for purchase by phone only.
1. Call us at 559-486-0410
2. We will advise lead time and cost.
3500 lb Custom Trailer Axle, 2" x 2" Raw Steel Tube
Square tube trailer axle is designed for use with many different types of trailers. Includes spindle nuts, washers, cotter pins, and centering plates. 4-bolt brake flange attached. Customer supplies hub face to hub face measurements.

$270
Hub Face-Hub Face Measurement
3500 lb Custom Trailer Axle, 2" x 2" Galvanized Tube 
Square tube trailer axle is designed for use with many different types of trailers. Includes spindle nuts, washers, cotter pins, and centering plates. 4-bolt brake flange attached. Customer supplies hub face to hub face measurements.

$280
Hub Face-Hub Face Measurement
3750 lb Custom Trailer Axle, 2" x 3" Raw Steel Tube
Rectangular tube trailer axle is designed for use with many different types of trailers. Includes spindle nuts, washers, cotter pins, and centering plates. 4-bolt brake flange attached. Customer supplies hub face to hub face measurements.

$280
Hub Face-Hub Face Measurement
3750 lb Custom Trailer Axle, 2" x 3" Galvanized Tube 
Rectangular tube trailer axle is designed for use with many different types of trailers. Includes spindle nuts, washers, cotter pins, and centering plates. 4-bolt brake flange attached. Customer supplies hub face to hub face measurements.

$290
Hub Face-Hub Face Measurement
5200 lb Custom Trailer Axle, 2" x 3" Raw Steel Tube
Rectangular tube trailer axle is designed for use with many different types of trailers. Includes spindle nuts, washers, cotter pins, and centering plates. 5-bolt brake flange attached. Customer supplies hub face to hub face measurements.

$330
Hub Face-Hub Face Measurement
5200 lb Custom Trailer Axle, 2" x 3" Galvanized Tube 
Rectangular tube trailer axle is designed for use with many different types of trailers. Includes spindle nuts, washers, cotter pins, and centering plates. 5-bolt brake flange attached. Customer supplies hub face to hub face measurements.

$350
Hub Face-Hub Face Measurement

Selecting and Measuring your Axle
 
When selecting an axle it is important to determine the axle capacity required for your trailer. Trailer capacity is based on the lowest capacity of the trailer components. This includes but is not limited to: frame, axle, spindles, hubs, bearings, wheels, tires, springs and all hardware. It is important to know what axle type you have when reusing old mounting hardware and for proper tire clearance. This includes straight axles (round or square), drop axles with offset spindles, and torsion axles. Also consider spindle size when reusing existing hubs or drums.
 
Hub Face:
Is the distance from outside of hub mounting flange to outside of hub mounting flange,  measured one-half way between top and bottom of hub.  The hub face is also know as the mounting surface where the wheel studs are located.  Hub face to Hub face can also be called the axle track or the centerline of the tire to the centerline of the tire.

Drop:
Is the distance from centerline of spindle to bottom of the main axle tube.
NOTE: In straight axles, you measure from the spindle centerline and axle main beam centerline.  Therefore there is no drop.











Spring Center:
Is the distance between center of one spring to the center of the other.

Spring Center Pads: 
Are locating or centering pads that can be welded or left loose and are meant for the leaf springs to mount onto.  Springs pads can be located at the top or bottom of the axle main beam.  DO NOT drill holes in beam in lieu of using spring pads.  This would set up stress concentration points, which will weaken the axle beam and allow water to enter.

Mounting your Axle:
When replacing your trailer axle, determine how it was previously mounted.  Under slung mounts have the spring mounted below the axle and over slung mounts have the spring mounted on top (also called reverse axle).  Spring seats or centering pads can be mounted over or under the axle.  Some axles have "camber" or road set, so there will be a bow in the axle until weight is applied.  Cambered axles should be mounted with the center bow on top.