V/M Custom Boat Trailers

Accessories

Standard Aluminum Step Cover
Includes 2-sided tape and pop rivets for installation.

$19.95 ea
Position
5" x 30" Standard Aluminum Fender Cover
5" x 30"
Includes 2-sided tape and pop rivets for installation.

$25.00
Boat Trailer Bunk Carpet (Sold by the foot)
Item#TB-2248-66/90
Black 9" wide boat trailer bunk board carpet. This polypropylene, weather-resistant carpet is cut to your specifications. Used for 2" x 4" bunk board.
Width (inches)
Sta-Lube Marine Grease
Item#SL3121
Aluminum complex grease using highly refined base oil
Formulated with polymer to provide adhesive, non-blend and water wash-out characteristics
Will resist water under the most severe conditions
Applications include ant-friction bearings, boat trailer bearings, steering cables and more
14 oz
$7.48
Trailer Buddy Hub Oil by UFP
Item#07032
This proprietary blend of 50w oil is designed to provide long term superior lubrication for boat trailer roller bearings. It is formulated from highly refined, stable, high viscosity index base oils, fortified with molybdenum and water repelling additives for superior anti-wear, anti-foam, and rust protection.

RECOMMENDED LUBRICANT
You can match the grease already in your hub by using Trailer Buddy Wheel Bearing Grease or use any other good quality #2 grade multi-purpoise grease. Use a water repellent grease if you'd like, but it's not necessary because water won't enter a properly filled hub. Grease consists of oil, soap, and additives. (The soap in any particular grease has one of several chemical bases [lithium, calcium, etc]. Oil sometimes separates from the soap and may leak out of the protector or under the rear seal. this is normal and won't create any problems.

BEARING REPACKING
There is no need to repack bearings if a good quality lubricant is used and the lubricant level is properly maintained.

PRESSURIZED SYSTEM WON'T DAMAGE SEALS
The slight (3 psi) pressure your protector maintains inside the hub WILL NOT damage inner seals. Adding grease with a power gun at a service station WILL damage seals! Fill ONLY with a hand gun.

1 quart.

$14.32
Floater Bar Small Rubber Grommets 
Floater Bar Grommets used on our trailers.



$14.99
Spare Tire Carrier Drop Down Bar
This item works with the spare tire carrier hoop that should already be installed in your trailer to create an area to hold one spare tire the same size as your trailers' wheels.
VIN# is important to provide both the correct size drop-down bar and also the correct paint color. If no VIN# is included, we will ship one painted black and sized for 14"-15" wheels. 



$150.00
VIN#
5-Bar Aluminum Step 
Cover 
Includes 2-sided tape and pop rivets for installation.

$19.95 ea

Position
5" x 30" 5-Bar Aluminum Fender Cover
5" x 30"
Includes 2-sided tape and pop rivets for installation.

$25.00
Boat Trailer Carpeted Bunk Boards  (each)

Item#BB-24
  • Carpeted Bunk Boards
  • Black Marine Grade Bunk Carpet
  • Bunks Are Mounted Flat

Size (H" x W" x L')
Plastic Bunk Glide-Ons
Includes 2 left and 2 right glide-ons with rounded end caps designed to fit 2" x 4" x 8' boards.

$48.99
Trailer Buddy Hybrid Oil for VAULT Hubs, 14 oz.
Item#VHLS14
Hybrid oil is a proprietary blend of lubricant specially formulated for UFP.
For use with the VAULT Trailer Buddy Axle only.
$10.36
Pinstripe, Priced by the foot. 
5/16" Pin-striping, used on all trailers 2008 and later. If you wish to color match to the type used on your trailer, please include your VIN#. Otherwise, leave that field blank. Instructions for application included. Approximately 60-70 feet is used in the manufacture of a trailer, depending on trailer size. 

$0.16 (per foot)
Colors
VIN#
Pinstripe, One box (150 feet)
5/16" Pin-striping, used on all trailers 2008 and later. If you wish to color match to the type used on your trailer, please include your VIN#. Otherwise, leave that field blank. Instructions for application included. Approximately 60-70 feet is used in the manufacture of a trailer, depending on trailer size.  

$19.95
Colors
VIN#
Replacement Label
If your VM Label (including information such as the VIN#, GVWR, etc) is partially damaged or completely destroyed, we can replace it so long as we have the VIN# of your trailer. The two methods by which you can identify the VIN# are as follows: On your current label, or you can find the last six digits on a welded plate on the front right-hand side below your trailer.


$19.95
Vehicle Identification Number
Crossmember Pad
Rubber Crossmember Pads for either 3" or 4" wide channel. 



$14.25 for 3" Channel
$19.25 for 4" Channel
Size of tubing